Search This Blog

Sunday, November 15, 2009

Les Paul gets a neck

I thicknessed one of my pieces of sycamore today, and with the bandsaw cut out three neck profiles (and a couple of 'ears' for the peghead). I glued them together with Extramite glue and clamped them up with loads of clamps. The cloth is there to catch the glue that is squeezed out. I'm a bit concerned about potential twisting (the sections of wood are not truly flat- or quarter-sawn) so I will probably fit some carbon fibre as well as the truss rod.

Tuesday, November 10, 2009

Finished (almost)

I did quite a lot last weekend and made the truss rod cover and a bridge out of an offcut of ebony from the fretboard. I tried a new design for the bridge, and I'm pretty happy with the result.

I fitted the metalwork (tuners and tailpiece) and put the strings in place. I am delighted with the tone, it has more sustain that the smaller mandolin, but still has that mandolin 'ring'. The fretboard seems huge compared with its smaller cousin, and needs a much more active left hand.

Once it has settleed down, and the strings hold their pitch for more than half an hour I will need to refit the bridge and lower the action a little bit.

I can now concentrate on the Les Paul, but already my mind is wandering to the cittern, gittern and the next two mandolins after that...




Here is a close up of the bridge. It has a bone saddle which is at a slant to compensate for the changes in pitch as the strings are pressed down onto the frets.





This is the back - the walnut has taken the finish nicely.

Wednesday, November 04, 2009

Starting to finish

The octave has had a couple of coats of of Tru-oil now. It will take a few more coats until the grain if filled and the surface is really smooth.